Ordinary devices of wiring terminals have special requirements: the minimum temperature is -5 ℃, and the maximum temperature is 40 ℃. Many studies have shown that the error rate of wiring terminals increases exponentially with the increase of temperature, and the service life of full-automatic terminal machines decreases exponentially with the increase of temperature. When the temperature increases by 10 ℃, the service life of wiring terminals will be halved.

In addition, whether the operation condition of the wiring terminals in the pneumatic system of the full-automatic terminal machine is superior or not also has a great relationship with the cleanliness level. When detecting whether the wiring terminals are fastened, ensure that all electrical circuits should be accurately and firmly connected to avoid downtime and chaos.

These conditions emphasized by the manufacturer of full-automatic terminal machine have a great relationship with the sound production efficiency and service life of the terminal machine.

1. If there is "sweat" on the wall, it is recommended to buy a dehumidifier for dehumidification. The effect of using industrial dehumidifier is better.

2. In long-term humid areas, charcoal can be placed in the room or bamboo charcoal can be laid under the indoor floor, which has a good effect on the balance of room humidity, the prevention and control of dust and the purification of air. Generally, it is better to cover the floor of the plant with cartons.

3. It‘s a good dehumidification method to put quicklime mixed with sand in a damp corner.

4. Dehumidify with air conditioner. Now most air conditioners have dehumidification function. Starting the dehumidification function of the air conditioner can effectively solve the problem of room humidity in rainy days, and can also form a comprehensive protection for the full-automatic terminal machine.

5. It is better to make a protective cover for the factory‘s automatic terminal machine when it is not in use, so as to effectively prevent the back of the appliance from contacting wet air. At the same time, you can also increase the frequency of using these appliances, because the machine will generate heat when running, which can effectively disperse the moisture. If the computer can‘t display because of humidity, you can turn it on and power it on. Generally, the monitor can work again in about 10 minutes.

6. If the outside air is too humid, remember to close the door and windows; If the room is too wet, you can use air conditioning and fans to dehumidify the room to ensure ventilation.